AEBoard AT2

One of the greatest budget off-road Electric Longboards on the market - the AEBoard AT2 All-Terrain Electric Skateboard. The AT2 has a range of up to 11 miles with the standard 10S4P battery. It's great for traveling on all terrain surfaces or in wintery weather. Featuring a Flex-Deck Battery, 6-Inch Never-Flat Rubber Tires, a USB Charging Port, and a max speed of 23.6 mph. The AT2 has four riding speeds to customize your journey.

The AEBoard AT2 is controlled by a wireless remote and has a sinusoidal wave drive and a Hall Sensor to provide smooth acceleration and braking. It's tough and reliable, with a weight capacity of 330 pounds. This electric longboard, with its flexible decking and smooth 22.7 pound board, is a fantastic carver for beachside boulevards and city environments, regardless of the surface.

Let's Take A Closer Look

Top Speed and Range

23.6 mph covering a range of 12.4 miles.

Hub Motor

720W (360W x 2), 152 mm x 40 mm.

Wireless Remote

• Wireless 2.4G controller for best performance.
• Rechargeable using micro USB recharge socket (comes with cable).
• Thumb wheel accelerator and break (forward to accelerate, back to break).
• Gear button with 3 speed modes.
• Forward / reverse switch.
• 4 LED displays indicates speed selection, direction of travel and battery level.
• 2 Separate LED displays indicate charge (red for low, green for charged) and connectivity (signal, will flash when not connected).
• Remote will operate at a distance of 10 meters.

Electronic Speed Control (ESC) / Motherboard

• Works with a sinusoidal wave drive and hall sensor to ensure smooth acceleration and braking. The 2.4GHz antenna is constructed into the ESC, solving any issues with the signal reaching the control circuit.
• 1st Gear (beginner): 9.9 mph / 16 km/h
• 2nd Gear (intermediate): 15.5 mph / 25 km/h
• 3rd Gear (advanced): 23.6 mph / 38 km/h

Scale Battery & ESC Box

• Material: PTFE
• Scale box - the battery packs can be customized according to your demand.
• USB plug which can charge your cell phone and remote.

Wheels

• Alloy and rubber anti-skid and shockproof wheels.
• It is very easy to switch from off-road wheels to street wheels.

What's In The Box?

• 1 x Electric skateboard (ready to skate)
• 1 x Power adapter and charger
• 1 x Wireless remote & USB cable
• 1 x T wrench (with 3 socket sizes and hex key / screwdriver) 

Safety Notes

• AEBoard AE2 leaves the factory water-resistant, but once you start using or maintaining it or replacing the battery, the board's water resistance will be reduced. Water can damage the board and water damage is not covered by the warranty. Therefore, you should avoid riding the board through water.
• Always wear a helmet and suitable safety equipment when riding an electric skateboard.
• Remember to turn off the remote and charge it when not in use to extend the battery life.

SPECIFICATIONS